This pair of CNC laser-cut and zinc coated (made in the USA) steel brackets are used to convert most drum-brake equipped 1993-2000 Honda Civic rear axle to disc. This setup seriously simplifies the popular Integra disc swap - You do NOT need to remove or change out your existing swing arms or spindles - so no extensive wrestling with rusty/seized bolts. We specify all 1997 Acura Integra (not Type R) pieces: the smaller 4 lug rear rotors and calipers with the integral parking brake along with the hoses, master cylinder, combination valve and e-brake cables. These are as near as your closest Honda dealer, NAPA or other parts house.
These brackets are designed to work with the stock "CIV"drum spindles ONLY.
This listing fits the "CIV" spindle only!
Note the heavy scalloping with the deeper "CIV" spindle. Check the application chart to verify that you have the CIV spindle, if not - check our 1984-97 listing to see if your car falls there.
Your existing trailing arm MUST be the all stamped steel piece, not the bolted up forged/stamped piece (earlier design). This will NOT work with the AWD WagoVan.
Items supplied are 2 zinc-coated brackets, and 12 attaching bolts.
We strongly recommend changing to a Integra rear disc master cylinder and proportioning block when doing this changeover.
A customer did a nice tech writeup here:
