US Car Tool's Brand New 66-70 B-Body Mini-Tub Kit!!
Fits all B-Bodies 1966-1970 Mopar B-Body
Note: 66-67 cars require additional modifications to inner wheel house
for hinge clearance if you plan to use the factory decklid hinges. After install, lower the hinge arm until it touches the inner wheelhouse and mark the spot with a sharpie, then use a ball peen hammer to create a clearance blister. You will need about 1/4" of clearance for the hinge and there is no tire clearance impact.
Note:68-80 Dodge Chargers require a special bracket for the factory decklid support that is slightly different due to the unique back glass and dutchman panel on those cars. We now include both brackets in the minitub kit. If you have an older kit for your Charger, send us a note and we can send you the Gen 2 Charger style brackets.
Ever wanted to gain more room for bigger tires in your vintage B-body Mopar but thought that moving the wheel tubs was to much work?
US Car Tool has created a kit to save you time and money for just that!
This kit allows you to Mini-Tub your B-body Mopar in a weekend with our pre-fabricated wheel tub filler.
Set Of Pre-Fabricated Wheel Tub Fillers
Set Of Trunk Hinge Braces Extensions 1966 & 1967 Chargers will not require the two braces that are included.
Set of Cut Templates
Set Of Instructions
Frequently Asked Questions:
Whats the biggest wheel and tire i can fit after installing a mini-tub and spring relocation?
Its hard to give sizes that are concrete due to the shape of the wheelhouse, ride height, and wheelbase.
When our mini-tub kit is installed with our rear spring relocation kit, this will allow for maximum tire size. The actual size tire that can be fit in the wheelhouse will depend on many factors including wheelhouse shape, size, ride height of vehicle, wheel backspace, wheel diameter, tire diameter, tire width, axle width. All these play an important part in selecting the correct size for your application.
Examples of tire size and wheel combinations we have used:
1967 Dodge Dart: 17x10 Wheel with 295x45x17 Tire
!968 Dodge Coronet: 15x12 wheel with 29x15x15 Tire (This application required modification to the factory outer wheelhouse.)
Does the rear end need to be shortened?
The rear will need to be shortened depending on your wheel offset, this will require mock-up and measuring to be correct.
Will the rear seat still fit?
The rear seat will still fit with no modification of the A-Bodies, however on B-Bodies the seat frame will need to be modified.
Do the seat belts still work?
The outboard seat belt anchor will need to be moved depending on your application.
Does this require different shock?
The shocks would ideally need to be shorter and will also depend on ride height, so mock up and measurement is required to get the right length.
We have more pictures of the mini-tub process on our website at www.uscartool.com under the pictures section.
Any questions give us a call at (919) 855-8200