Gen3 Hemi swap mount for 67-73 A Bodies
Engineered to support a Gen3 Hemi Swap into your classic A Body Mopar using a factory V8 style K-frame mount. Fully adjustable and allows moving your Hemi upwards as much as 2.5" for clearance along with a move forward by up to 2.5" for transmission tunnel and header clearance.
This mount allows use raising the Gen3 Hemi for OEM Power steering box and A/C compressor; requires fabrication, mockup and welding to your car and some engines may require hood scoops for clearance with Power Steering and A/C.
Uses a unique Urethane mount style needing only 3/4" clearance next to the Gen3 Hemi engine block and also provides for other custom engine mount solutions. If you need to put a Hemi in it, these mounts are what you need.
Mounts fit 67-76 A Bodies using OEM factory V8 k-frame mounting pads (Does not fit spool style OEM K-frames)
Comes with High strength Metric Hardware to attached to the Gen3 Hemi engine block (5.7, 6.1, 6.2 and 6.4) and Grade 8 fasteners to connector the mounts.
We have versions of this mount for the V8 K-frame and the Slant 6 K-frame