We have discontinued the adjustable Gen3 Hemi swap mounts.
If you need to make custom mounts, check out our DIY Gen3 Hemi mounts in the builders series, part number USCTAM2072
Gen3 Hemi swap mount for 67-73 A Bodies
Engineered to support a Gen3 Hemi Swap into your classic A Body Mopar using a factory V8 style K-frame mount. Fully adjustable and allows moving your Hemi upwards as much as 2.5" for clearance along with a move forward by up to 2.5" for transmission tunnel and header clearance.
This mount allows use raising the Gen3 Hemi for OEM Power steering box and A/C compressor; requires fabrication, mockup and welding to your car and some engines may require hood scoops for clearance with Power Steering and A/C.
Uses a unique Urethane mount style needing only 3/4" clearance next to the Gen3 Hemi engine block and also provides for other custom engine mount solutions. If you need to put a Hemi in it, these mounts are what you need.
Mounts fit 67-76 A Bodies using OEM factory V8 k-frame mounting pads (Does not fit spool style OEM K-frames)
Comes with High strength Metric Hardware to attached to the Gen3 Hemi engine block (5.7, 6.1, 6.2 and 6.4) and Grade 8 fasteners to connector the mounts.
We have versions of this mount for the V8 K-frame and the Slant 6 K-frame
