Mopar 63-66 Early A-Body Mini-Tub Kit

Your Price: $388.27
Part Number:USCTAM2035

US Car Tool's Brand New 63-66 A-Body Mini-Kit!!

 Fits all A-Bodies 1963-1966 Mopar A-Body Dart/Valiant

Ever wanted to gain more room for bigger tires in your vintage A-body Mopar but thought that moving the wheel tubs was to much work?

US Car Tool  has created a kit to save you time and money for just that!

This kit allows you to Mini-Tub your A-body Mopar in a weekend with our pre-fabricated wheel tub filler.


  • Set Of Pre-Fabricated Wheel Tub Fillers

  • Set of Cut Templates

  • Set Of Instructions

We have more pictures of the mini-tub process on our website at under the pictures section.

Frequently Asked Questions:

Whats the biggest wheel and tire i can fit after installing a mini-tub and spring relocation?

Its hard to give sizes that are concrete due to the shape of the wheelhouse, ride height, and wheelbase.

When our mini-tub kit is installed with our rear spring relocation kit, this will allow for maximum tire size. The actual size tire that can be fit in the wheelhouse will depend on many factors including wheelhouse shape, size, ride height of vehicle, wheel backspace, wheel diameter, tire diameter, tire width, axle width. All these play an important part in selecting the correct size for your application.

Examples of tire size and wheel combinations we have used:

1967 Dodge Dart: 17x10 Wheel with 295x45x17 Tire

!968 Dodge Coronet: 15x12 wheel with 29x15x15 Tire (This application required modification to the factory outer wheelhouse.)

Does the rear end need to be shortened?

The rear will need to be shortened depending on your wheel offset, this will require mock-up and measuring to be correct.

Will the rear seat still fit?

The rear seat will still fit with no modification of the A-Bodies, however on B-Bodies the seat frame will need to be modified.

Do the seat belts still work?

The outboard seat belt anchor will need to be moved depending on your application.

Does this require different shock?

The shocks would ideally need to be shorter and will also depend on ride height, so mock up and measurement is required to get the right length.

Any more questions give us a call at (919) 855-8200

We have more pictures of the mini-tub process on our website at under the pictures section.

Related Items