Mopar Gen3 Hemi Engine / Transmission 3 point Dolly with swivel casters

review
0
0
5
Your Price: $250.68
Part Number:USCT7M1004
Mopar Gen 3 Hemi Engine / Transmission Dolly with swivels casters
Fits all versions from the original 5.7 through the Hellcat and Redeye Supercharged Gen3 Hemi engines.

If you have a Gen3 Hemi engine attached to a transmission, the USCT Motorsports Chrysler Gen3 Engine & Trans Dolly is the best tool to store and roll them around your shop or garage. Made of 3/16 steel, the USCT Motorsports Engine Dolly will withstand years of use, and the coatings are not affected by gasoline, oil, water or fluids.

Bolts easily onto the engine mounting bosses on the side and the Transmission mount location in the rear - all hardware is included to mount the Engine Dolly to your Mopar Gen3 Hemi; fits 5.7, 6.2 and 6.4 engines with standard OEM boss type engine mounts on the block. Has plenty of room for deep oil pans with over 9" clearance below the block oil pan rail. Need to secure the engine while on the dolly in the back of your pickup truck? Convenient slots for cargo straps on each upright make secure tiedown easy.

For any Engine Dolly, it is all about the Casters. We source these casters from the same company that makes them for our K-frame stands and Rotisseries. These 4" caster wheels are rated to support over 500lbs each. We put three of them on the USCT Engine Dolly because we have a simple philosophy that is the foundation of our products; "Nothing overbuilt ever broke".

We start by CNC laser cutting steel sheet, then fold these on our CNC Press Brake, add three (3) high strength ball bearing swivel casters and all the hardware to mount these to your block or engine. Everything you need to easily store and move your Mopar Gen3 Hemi trans combination is in the box - except a motor & transmission to bolt this to and a few wrenches to tighten the bolts.

Fits Gen3 Hemi (5.7, 6.1, 6.2 and 6.4) and Gen3 Transmissions HP90, HP70, 545, NAG1

Note: This dolly is for an Gen3 Engine attached to a transmission and uses three casters, if you want a dolly for an Engine / block or transmission alone using 4 casters, please add the optional Gen3 Hemi rear mount kit.